| ▪︎ 기술 사양 |
| Compatible Chemistries |
- Developer : Horsell D18 Thermal Plate Developer
- Replenisher : Horsell D18 Thermal Plate Replenisher / Horsell D18 Thermal Plate Developer as top-up
|
| Imaging Characteristics |
- Spectral sensitivity : 800 to 830 nm IR diodes
- Imaging energy : 130 – 160 mJ/cm2 depending on device and developer system
- Resolution : 1 - 99% @ 200 lpi FM 25 accreditation (dependent on platesetter and correct operational parameters)
|
| Yule Nielson Factor |
1:14 |
| Plate Handling |
- Safelight : White light operation 75 minutes @ 1500 lux (ambient room lighting)
- Latent image : 24-hour stability from imaging to processing
- Post-baking conditions : Static oven 230 – 240oC for 8 – 10 minutes
Conveyor oven 1600 mm/minute @ 280 – 290oC
- Finisher : Any finisher for thermal positive plates
- Storage conditions : Unopened packs: 16 – 26oC; 40 – 60% RH
- Storage finisher : Any finisher for storing thermal positive plates
|
| Accredited platesetters |
All Kodak platesetters (Trendsetter, Achieve, Magnus and Lotem platesetters)
Screen 4000, 4100, 4300, 6600, 8000, 8100, 8300, 8600 and 8800 devices
Heidelberg Suprasetter and Topsetter devices
|
| Accredited processors |
Most standard processors |
| Processor set up (basics) |
- Dip-to-nip dwell time : 36s with T18 Developer
- Temperature : 23℃ +/- 1℃
- Replenishment rate : 100 – 120 ml/m2 (with D18 Developer)
- Anti Ox : 80 – 100 ml/hr (depending on processor size)
- Scrub roller speed : 60 – 120 rpm (depending on processor)
- Scrub rollers : 2 – medium/firm scrub pressure
- Filter : 50-micron cotton or foam type, change filter 1000 sqm
|
FM Screening
The higher end of developer replenishment and anti-oxidation settings are recommended to maintain developer activity levels.